An innovative Two part, pre-mixed, high strength polyester wood filler designed to mix in the nozzle and be applied directly to the area to be repaired. A cost-effective solution to repair / fill medium size holes up to 10mm in depth. Supplied in white, they can be over-painted.
- Styrene free formulation meets the new requirements for hazardous substances.
- Used for minor repairs – wood damaged by rot, grain filling and repairs to shakes, cracks, splits and knots
- Supplied in a cartridge to be applied using a skeleton gun
- Hardener and filler supplied in one tube with a mixer nozzle that combines them together
- Can be “gunned” directly into the gaps and holes to be filled
- Typical working time is 30 minutes
- Fills medium sized holes up to 10mm in depth
- Can be painted, stained and varnished
- Can also apply straight on to a board and use a spatula or spreader to fill the gaps
- No separate hardener tubes needed
- Strength of a 2 part mix
- Recommended for indoor use but can be used outside if the weather is dry
- Always sand the surface once set – optimum sanding time is 15 – 30 minutes
- Available in White in 275ml tins
- Additional Hardeners and spreaders are available
- Re-use many times – Low odour
- Leave the filler slightly proud of the surface to allow for sanding
- Weather proof
